Soldering + Desoldering Digital Temperature Controlled Rework Station ZD987

Description

Soldering + Vacuum Desoldering Station ZD987
This temperature controlled soldering and desoldering station makes building and repairing circuit boards a breeze.
The temperature-controlled soldering iron features a comfortable grip. The station's dual display shows the set-point temperature and the actual temperature in either centigrade or farenheit. The up/down buttons can be used to change the desired temperature of the soldering iron. The iron has a built-in temperature sensor that feeds back the ACTUAL temperature to the station, which in turn controls the power delivered to the heater, to provide a close-loop control of the actual temperature.
For desoldering through-hole parts, simply place the heated tip of the desoldering gun over the pin to be de-soldered, wait for the solder to melt, then press the trigger. This will activate the vacuum pump in the station to suck the melted solder through the hollow tip into a waste-reservoir and leave the component's leg and PCB free of solder. It only takes a few seconds per pin.
If you've ever tried to de-solder parts using wick or a manual vacuum pump, you know how difficult that is, particularly on a double-sided board. You will NOT have these problems using our desoldering station, because it sucks the solder from both sides of the board, leaving the hole and component leg virtually free of solder.
The station features independent dual LCD displays, showing the desired temperature and the actual temperature. The display can be switched from Fahrenheit to Celsius if, and the desired temperature can be dialed-in using the up/down buttons. Illuminated on/off switches for each section are conveniently located on the front.
The package comes with the following items:
1.) Temperature Controlled Station, with AC Power Cord (ZD-985)
2.) Vacuum Desoldering Gun
3.) Temperature Controlled Soldering Iron
3.) Three tips with different sized holes (0.8mm = N5-1, 1mm = N5-2, 1.3mm = N5-3)
4.) Three cleaning rods (these are used to clean the hole in the tips when necessary)
5.) Spare Filters
6.) AC Cord
WARRANTY
We provide a
6 months parts and labor
warranty (consumables like tips, filters and heating element are excluded). This warranty is provided by Memotronics here in the USA, we do not simply refer you to the manufacturer.
SPARE PARTS & CONSUMABLES:
Spare parts and consumables (such as additional tips, filters, cleaning rods, heater elements) are available separately.
USA and International Shipping, Feedback, Cancellations, Returns
We combine shipping on all items (using the total shipment weight) unless specifically stated otherwise in the description.
To get the combined shipping price, you must
pay for all items together in a single PayPal payment
.
More than 99.5% of our orders ship within 1 business day (Mo-Fri except USPS holidays), and we leave feedback and tracking information upon shipping your order.
US shipping rates also apply to Alaska, Puerto Rico, Guam, APO/FPO/DPO, Territories and Minor Outlying Islands.
Local Pickup is available at our Nash, Texas location.
All orders shipping to Texas will be subject to 8.25% Sales Tax on the order total including shipping cost.
International Buyers – Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Accurate customs declarations (that include the shipping cost) are included on all international shipments.
We strive to earn a five-star rating: If you are not satisfied with your purchase, please contact us by email, eBay message, or by phone.